Crashing with "no camera" option

[Icewulf7]

I do not possess a webcam, and from many suggestions, I've tried using the "no camera" option on Procaster. However, each time I do, when it gets to the part where it's trying to load the audio, Procaster freezes and I have to close it with my Task Manager. Is my computer unable to run it? Below are my DirectX diagnostics:

------------------
System Information
------------------
Time of this report: 10/2/2012, 21:30:26
Machine name: J-7AE56F011F364
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.120504-1619)
Language: English (Regional Setting: English)
System Manufacturer: INTEL_
System Model: D845EPI_
BIOS: BIOS Date: 05/04/06 03:37:08 Ver: 08.00.08
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory: 1022MB RAM
Page File: 613MB used, 1847MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: ALL-IN-WONDER RADEON 7500 (Microsoft Corporation)
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 7500 (0x5157)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5157&SUBSYS_0F2B1002&REV_00
Display Memory: 64.0 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6462 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 4/14/2008 01:41:50, 201728 bytes

[coryfrans]

Originally Posted by Icewulf7

I do not possess a webcam, and from many suggestions, I've tried using the "no camera" option on Procaster. However, each time I do, when it gets to the part where it's trying to load the audio, Procaster freezes and I have to close it with my Task Manager. Is my computer unable to run it? Below are my DirectX diagnostics:

------------------
System Information
------------------
Time of this report: 10/2/2012, 21:30:26
Machine name: J-7AE56F011F364
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.120504-1619)
Language: English (Regional Setting: English)
System Manufacturer: INTEL_
System Model: D845EPI_
BIOS: BIOS Date: 05/04/06 03:37:08 Ver: 08.00.08
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory: 1022MB RAM
Page File: 613MB used, 1847MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: ALL-IN-WONDER RADEON 7500 (Microsoft Corporation)
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 7500 (0x5157)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5157&SUBSYS_0F2B1002&REV_00
Display Memory: 64.0 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6462 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 4/14/2008 01:41:50, 201728 bytes

Hello,

According to your specs, your computer does not meet the minimum requirements to run procaster.